?>
線上FAQ分類: Questions10 Things Your Competitors Learn About Ghost Immobiliser 2
Odessa Terrell asked 1 天 ago

Ghost Immobiliser 2

Protects your vehicle against key cloning and prevents thieves from driving the vehicle using original keys. Our latest immobiliser is connected to your vehicle’s CAN data network and a unique PIN has to be entered to start the engine.

Unlike trackers lamborghini ghost installer does not transmit any radio frequency signals and cannot be detected using diagnostics tools. There are also no LED indicators or buttons giving away its presence within your van or car.

Anti-key cloning

The lamborghini ghost installer immobiliser was created to combat key cloning. This device is connected to your vehicle’s data network CAN and creates an unique pin code by using the factory buttons on your dashboard and steering. This will stop the thief from being able to start your car. If the wrong PIN code is entered, your engine will not be started and it will be impossible for them to leave with your pride and joy.

Ghost immobilisers are new technology that is extremely hard for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or jacked the ghost immobiliser is an invisible electronic device that cannot be recognized by ordinary thieves because it doesn’t emit any radio signals and works silently.

The next-generation immobiliser protects your vehicle from a range of threats, such as key-hacking, relay attacks and cloned copies. It is also able to stop the thief from adding the new key or replacing your ECU, as it will not allow the car to start without entering the correct PIN code first.

The ghost immobiliser 2 unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It is deactivable through an app that is installed on the smartphone of the driver. This is perfect for the time you have to give your car to valet parking, or maintenance without keys.

The Autowatch Ghost-II represents the latest version of the local ghost installer immobiliser. It is designed to be simple and user-friendly as possible while remaining as secure as possible. This is accomplished by integrating the Ghost-II with the vehicle’s CAN data network. This means that there are no wires that are able to be hidden or easily discovered. It also has a built-in feature that allows you to disable your Ghost-II by connecting to the vehicle’s Bluetooth, so you can enter and drive without any hassle.

OBD port hacking

OBD port hacking is the newest method employed by professional car thieves to steal cars. Thieves can gain access to your vehicle’s OBD using a laptop, a mobile application, and cables that are available on the internet for less than PS50. Once they have access, they are able to do whatever they want, from resetting your vehicle’s fault codes to tuning your car, or getting it stolen in under a minute.

It can protect your vehicle from being taken away by requiring a unique PIN code to be entered in conjunction with your key fob prior to you start the engine or drive away. It communicates with the vehicle’s ECU (Engine Control Unit) by using the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without requiring a PIN code.

You’ll also require cables with OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. Also, you will require a cable with OBD pins connected to the CAN Bus. These cables can be purchased on Amazon/Ebay around PS50. The cable has to be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker has gained access to the OBD port on your vehicle, they can send diagnostics to the system using high baud rates which can cause a crash to the car’s CAN and prevent the system from functioning. This can cause your car’s engine to stall or stop working.

There is no need for additional remotes or key fobs

A car immobiliser is a fantastic piece of anti-theft technology used by millions of modern vehicles around the world. An aftermarket immobiliser protects your vehicle through the use of engine ECU software that stops cars from starting when a false transponder is transmitted.

It is possible for a thief to have the code to disable an immobiliser, to bypass it. The battery in most key fobs is easily removed by prying it open and a burglar can employ a simple tool take out the immobiliser’s circuit board and replace it with an empty. Then, they will be able to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates with the engine ECU (Engine Control Unit) via a discrete quiet data circuit in CAN that is not detectable by diagnostic tools like the ones employed by high-tech thieves. It also does not use a traditional key-fob with LED indicators, so it’s not visible at sight.

You may have to turn off Autowatch Ghost Installers Birmingham‘s Ghost 2 protection at certain times, such as during valet parking or a service. Ghost CAN immobilisers feature a mode called ‘Service Mode,’ which is activated with just a click of a button on your phone. The car is still operational however, the maximum speed is restricted to 36 mph.

Contact us today to set up an appointment for a demonstration in our workshop. A member of our team will explain the process and provide you with your Ghost 2 emergency card, installation certificate, and security assurance.

Simple PIN code Change Process

Ghost is a new generation device that can secure your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle’s CAN data network. A personalised PIN can be programmed using buttons on the dash and steering wheel. The device does not emit RF signals, which means it is not able to be tampered with. This makes it inaccessible to sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code can be changed to block previous drivers, or even add an override number if you forget the sequence. When installing the installer will show how to do this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence to allow your mechanic or garage can repair the vehicle without needing to know the code. This is a great option for those who do not want their PIN sequence to be revealed but still would like to leave their vehicle with valet parking or service.

In contrast to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that uses the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered via the app on your smartphone. No extra LED indicators are thrown, and your car is secured without possibility of being disabled.

Every vehicle is tested

Contrary to key fobs which require you to press buttons the ghost immobiliser is hidden under your dash or steering wheel so that only you know it’s even there. The device is connected to the CAN network of your vehicle, and a PIN code can be programmed using buttons on your car. The system stops the engine from starting until this code has been entered before. This means that thieves cannot clone the keys of your vehicle or gain access to the OBD to hack into it.

Ghost can be utilized in all vehicles including electric cars motorhomes, vans, motorhomes and bicycles. It’s also extremely flexible and can be programmed to shut down in various situations. It can be programmed to go into Valet mode, for instance, when the vehicle is transferred to a valet service or parking company. This permits you to drive your vehicle within a speed limit of 30 mph, and the ghost immobiliser will start to activate itself when your vehicle is returned to your possession.

The device can be reset at anytime to your personal PIN code. This is useful when you forget the code or the device ceases to function which means it’s just as good as new.

It’s also important to note that the device is inaccessible to those who aren’t familiar with it. It does this by analyzing the buttons on your dashboard and steering wheel, and using the data they send in order to determine the button that was activated. This makes it a safe and secure security system that can’t be manipulated through RF scanning or jamming, or a door lock pick set.

10 Things Your Competitors Learn About Ghost Immobiliser 2
?>