?>
線上FAQ分類: Questions7 Useful Tips For Making The Profits Of Your Ghost Immobiliser Problems
Phillipp Hetherington asked 17 小時 ago

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discrete and does not require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This allows your vehicle to begin.

Simple change of PIN code

With the increasing rate of vehicle thefts, many owners are looking to improve their security. There are a variety of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However, not all of these are equally efficient in protecting your vehicle. While a tracking device can assist in finding your car in the event of theft, it will not prevent the crime from happening in the first place. Immobilisers, however are exactly what they claim on the tin – they shut off your car’s engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your vehicle.

Utilizing the buttons already in your car, the ghost device creates a unique sequence which must be entered before the car’s engine starts. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this, there is also an app for mobile devices that can act as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This is especially beneficial if you have to give your car away for valet parking or servicing since the immobiliser will remain activated, but not disabled.

The Ghost is an innovative and unique device that operates with the buttons of your vehicle instead of as a standalone unit. It’s not just an effective deterrent to vehicle theft, but it can also be used on any future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof tiny device

The autowatch ghost installation walsall ghost immobiliser is a sophisticated security device that protects your car from key cloning, hacking & ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle’s ECU via the CAN data bus, which disables the engine. It can be fitted into the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices, which is the most common method used by car thieves to circumvent existing immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It can’t be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by conventional diagnostic tools. The autowatch ghost installer ghost does not produce LED indicators and instead uses the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, customizable disarm sequence. This sequence can be extended by up to 20 presses for additional security. The iPhone app allows only one connection, with a unique pairing code for the ghost immobiliser 2. All communication between the two devices is encrypted.

The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to run when the correct PIN code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the world’s first aftermarket immobiliser for CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a custom code. The system can be turned on and off by using your smartphone’s app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way a thief could take your vehicle is physically towing it away and even then they wouldn’t be capable of driving it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, and the door panels, to create unique PIN codes that needs to be entered to use your vehicle. This is done without any extra hardware, such as a keyfob. It can take up to 20 presses. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves are not able to use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.

Ghost is more difficult to get rid of than car alarms that require disarming with the buttons. This makes it an excellent supplement to a GPS tracker that can assist in locating your car after it’s been stolen.

Override of emergency PIN code

You do not have to look too far on social media to find stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with your original keys.

Our Ghost immobiliser fights this and provides you with an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code must be entered in conjunction with your original key fob in order to stop the vehicle from starting. The unique override pin is located on a black card that you will receive after your installation. It is easy to remember because there are no LED indicators.

The device is hidden in the wiring of the vehicle and doesn’t emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to the tracking device.

Contrary to most security systems, which have an engine relay bay these CANBUS Immobilisers communicate with the vehicle’s ECU and BCM via CAN data bus (brand dependent). This enables them how to install a ghost immobiliser shut down the vehicle completely by sending an electronic block of commands to both the ECU and the engine.

These systems can also be linked to an analog alarm immobiliser, tracker or alarm. This should be decided prior to installation. They are also fully service/valet mode-compatible and a great alternative to a tracker if you are you are taking your car in for an electrical fault at the dealership.

Service/Valet mode

In recent years, there has been a increase in vehicles that are stolen without owners’ keys. With the ease of access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your joy and pride. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been hijacked.

It communicates directly to your vehicle’s ECU (Engine Control Unit) through the CAN data circuit. It’s completely silent since it doesn’t utilize radio frequencies or key fobs. It cannot be detected using diagnostics or fit any other hacking device. It also prevents the user from using a new ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, the centre console and door panels. Before you can begin your vehicle, you must enter a unique and changeable PIN code up to 20 numbers.

This is the very first aftermarket CAN bus immobiliser that was designed. It will stop your vehicle from being driven or even started if you don’t enter a PIN number first. If the device is in armed and you attempt to drive off it will display an indication on your dash, which will flash regularly for around 300m. If you type in your PIN code during this time, it will disarm the anti-hijack and your car will continue to operate in the normal way. If you don’t enter your PIN code at this point, the indicator will keep flashing & will require another PIN code for every attempt to start your vehicle.

7 Useful Tips For Making The Profits Of Your Ghost Immobiliser Problems
?>